We made some more progress on our tower project today. Brian Veillette (Nashyei@aol.com), our excavation contractor, completed the conduits for our feedlines today and Brian Fessenden (fessendenbrian@yahoo.com), our Electrician, added an electrical outlet at the tower to provide power for our rotating ring and for general use at the base of the tower. We installed one 6″, one 4″ and two 2″ conduits to accommodate all of our hardline feed lines and control cables. These will allow us to run all of the cabling underground from the tower to our shack entry.
It will take a little time for our lawn to “heal” but it’s nice to have these steps completed. It looks like some of our four yagis may arrive as early as late next week and the next major step will be to assemble them.
You can read more about our tower project via the articles which follow:
- First Tower Part 1 – Ground Broken For New Tower!
- First Tower Part 2 – Tower/Antenna System Design Details And Equipment Ordering
- First Tower Part 3 – More Excavation For Feedline Conduits
- First Tower Part 4 – Tower/Antenna System Analysis And Design (Planning And EZNEC)
- First Tower Part 5 – Tower/Antenna System Analysis And Design (HFTA Analysis)
- First Tower Part 6 – We Have A Tower!
- First Tower Part 7 – 100 ft Tower Completed!
- First Tower Part 8 – VHF/UHF Antenna System Design
- First Tower Part 10 – Building Yagis (70 cm)
- First Tower Part 11 – Building Yagis (2m)
- First Tower Part 12 – Building Yagis (SteppIR DB36)
- First Tower Part 13 – Building Yagis (SteppIR DB36 Continued)
- First Tower Part 14 – Building Yagis (SteppIR DB36 Continued II)
- First Tower Part 15 – Building Yagis (SteppIR DB36 Completed)
- First Tower Part 16 – Building Yagis (Second SteppIR DB36 Completed)
- First Tower Part 17 – Feedline Breakout System
- First Tower Part 18 – Antennas On The Tower (Preparation and Upper Yagis)
- First Tower Part 19 – Antennas On The Tower (System Integration)
- First Tower Part 20 – Antennas On The Tower (System Complete)
- First Tower Part 21 – Antennas On The Tower (Final Odds and Ends)
- Complete Presentation on Amateur Radio Station Design And Construction
– Fred, AB1OC
